NodeMCU LDR

#include <ESP8266WiFi.h> //The library we will use for the wifi connection
#include <PubSubClient.h> // The library we will use for the mqtt connection

//mqtt connection library settings
WiFiClient espClient;
PubSubClient client(espClient);


//settings for internet and mqtt connection
const char* ssid = ""; // wifi SSID
const char* password =  ""; // wifi password 
const char* mqttServer = ""; // mqtt server ip  to be sent by smartespiot by mail 
const int mqttPort = ; // mqtt port   to be sent by smartespiot by mail 
const char* mqttUser = ""; // mqtt username  to be sent by smartespiot by mail 
const char* mqttPassword = ""; // mqtt pass to be sent by smartespiot by mail 
//



void setup() {
  // initialize serial communication at 9600 bits per second:
  Serial.begin(9600);

WiFi.begin(ssid, password); // start the wifi connection process

  while (WiFi.status() != WL_CONNECTED) { //
    delay(500); //wait 500ms
    Serial.println("Connecting to wifi..."); // wait until the wifi process connects
  }
  Serial.println("Wifi connection ready :)"); // print the connection made information to the serial port

  client.setServer(mqttServer, mqttPort);//start connecting to the mqtt server from the specified port

  while (!client.connected()) { //wait until we connect to mqtt
    Serial.println("Connecting to MQTT server...");

    if (client.connect("SmartEspIOT", mqttUser, mqttPassword )) {//login to mqtt server with username and password with smartespIOT name

      Serial.println("MQTT connection established :) ");

    } else {

      Serial.print("Unable to connect... ");// If the connection cannot be established, let's give a warning
      Serial.print(client.state());             // print the problem description
      // We can understand the problem according to the information returned from the clients state.
      //-4 : MQTT_CONNECTION_TIMEOUT - the server did not respond in the ongoing time
      //-3 : MQTT_CONNECTION_LOST - network connection lost
      //-2 : MQTT_CONNECT_FAILED - network connection failed
      //-1 : MQTT_DISCONNECTED - disconnected
      //0 : MQTT_CONNECTED - connection established
      //1 : MQTT_CONNECT_BAD_PROTOCOL - The server does not support the requested MQTT version
      //2 : MQTT_CONNECT_BAD_CLIENT_ID - The server did not accept your information
      //3 : MQTT_CONNECT_UNAVAILABLE - The server did not accept the connectionetmed
      //4 : MQTT_CONNECT_BAD_CREDENTIALS - username password not accepted
      //5 : MQTT_CONNECT_UNAUTHORIZED - you are not authorized to connect


      delay(2000);   // wait two seconds and try connecting again

    }
  }
 
}

void loop() {
  // read the input on analog pin 0:
  int sensorValue = analogRead(A0);
  
  // Convert the analog reading (which goes from 0 - 1023) to a voltage (0 - 5V):
  float voltage = sensorValue * (5.0 / 1023.0);
  
  // print out the value you read:
  Serial.println(voltage);
client.publish("devicename/ldr", String(voltage).c_str());// send voltage
delay(2000); // wait two seconds and send the message again
}

LDR_smartespiot_web

.zip

Download ZIP • 1KB